- #XMEYE APP ERROR. WHEN I LOG IN IT TELLS ME MO DEVICE HOW TO#
- #XMEYE APP ERROR. WHEN I LOG IN IT TELLS ME MO DEVICE INSTALL#
- #XMEYE APP ERROR. WHEN I LOG IN IT TELLS ME MO DEVICE PC#
- #XMEYE APP ERROR. WHEN I LOG IN IT TELLS ME MO DEVICE WINDOWS#
Make sure in the DVR Network settings your IP is fixed with UPNP unchecked then the default gateway set to what was shown in Ipconfig so example if your default gateway says 192.168.0.1 then set it to that, then set the DNS to what it says in your Routers config page, i set my cams to a fixed internal ip of 192.168.0.107 and default gateway was 192.168.0.4, with my DNS in router set to 192.168.4.100.
#XMEYE APP ERROR. WHEN I LOG IN IT TELLS ME MO DEVICE WINDOWS#
To confirm your network internal ip's press Windows and X on keyboard and run Command prompt as Admin then type "ipconfig" without quotes there you will see ip addresses and default gateway which is your LANs default ip and geteway for your router and current network settings. If its 10.0.0.1 then set DVR to something like 10.0.0.10 etc Make sure you uncheck UPNP and use a fixed ip in device config for your DVR Example 192.168.0.107 assuming your netork is configed to 192.168.0.1 Guys, hope I helped you.took me a while to find it outĬlick to expand.For anyone struggleing to connect Xmeye Via 3G 4G 5G when it works ok on wifi make sure in your DVR config / Device Config webpage, under Network If it is not connected and it says: checking DNS, or getting config, or connecting.mostly you have exactly similar problem. In this settings you will find out "Cloud status".
#XMEYE APP ERROR. WHEN I LOG IN IT TELLS ME MO DEVICE HOW TO#
How to check the problem quickly: in xmeye, there is a setting for each camera. You cam is now accessible from your wifi, same as from mobile data plan. In my case it crashes everytime I clicked to config tab, so I had to use CMS.Īfter successfully logged, just go to internet option of your IP cam and check the box "use DNS"
#XMEYE APP ERROR. WHEN I LOG IN IT TELLS ME MO DEVICE INSTALL#
Conenct to IP and It will ask you to install ActiveX component.do it. In win10 you have to use old internet explorer (just type explorer to program search). Or look at your router for connected devices. If you dont know the IP use some network scan program to find it out. Try it first, but this IP can change.so maybe it wont work. In most cases the IP is written on camera itself.
#XMEYE APP ERROR. WHEN I LOG IN IT TELLS ME MO DEVICE PC#
Do it from the PC on the same network or wifi and log to IP of you cam.
If you dont have CD and CMS, never mind, just connect straight to Cams IP. In this case you dont need to know IP of your cam. You just need to log in to your camera.Įasy way how to do it, is to use the CMS smoftware from CD you got with IP CAM. I was wondering if anyone could help me to sort this out? I assume it’s something to do with the IP address which is being assigned or something but then when the box restarts its then using a different one? Just a guess.Hallo, I fight with this problem for some time now, and finally got the solution !ġ. This may be due to the DVR auto restarting itself at set times which is an option within the settings. What I have noticed is that if I reset my Router (BT Hub) the app does work briefly after that but then in a day or so it will stop again.
This has always been the same setup since installation and worked fine for months. I’m putting this down to me recently upgrading my BT Home Hub to the newer BT Smart Hub.ĭVR is in the loft/attic and is connected to the Internet via Ethernet which is connected to a TP-Link WiFi range extender which is connected to my main WiFi from the BT Hub. I’ve had my CCTV setup for about a year now and during that time I have been using the XMeye App to view remotely.Īs of the past few weeks I have noticed that I can no longer connect to my system using the app.
0 kommentar(er)
